AIR CONDITIONER
OPTIONAL PARTS
IR RECEIVER KIT
INSTALLATION MANUAL
Contents
1.
SAFETY PRECAUTIONS ...................................................................... 1
2.
ABOUT THIS PRODUCT ....................................................................... 1
3.
INSTALLATION WORK ......................................................................... 1
4.
TURNING ON THE BREAKER .............................................................. 2
5.
REMOTE CONTROLLER SETTING ..................................................... 2
6.
FUNCTION SETTING ............................................................................ 3
7.
SELECTING THE REMOTE CONTROLLER CUSTOM CODE ............ 3
8.
OTHER SETTINGS ............................................................................... 3
For authorized service personnel only.
1. SAFETY PRECAUTIONS
• Let the customer keep this installation manual because it is needed when
the air conditioner or IR receiver kit is serviced or moved.
Indicates a potentially or imminently hazardous situ-
ation which, if not avoided, could result in death or
WARNING
serious injury.
For the air conditioner to operate satisfactorily, install it as outlined in this
installation manual.
Installation work must be performed in accordance with national wiring
standards by authorized personnel only.
Do not turn on the power until all installation work is complete.
Indicates a potentially hazardous situation that may
result in minor or moderate injury or damage to prop-
CAUTION
erty.
Do not wire the IR receiver kit wire together with or parallel to the connec-
tion cables, transmission cables, remote controller cables, bus wire and
power supply cables of the indoor and outdoor units. It may cause errone-
ous operation.
Do not install the IR receiver kit wire near a source of electromagnetic
waves.
2. ABOUT THIS PRODUCT
2.1. Parts and accessories
The following installation accessories are supplied. Use them as re-
quired.
Name and Shape
IR receiver unit
Strap
Q'ty
Application
For receiving the signal from the
remote controller
1
Prevent receiver unit from falling
down
1
Remote controller holder
Remote controller
Battery
Tapping screw
Cable tie
2.2. Control panel
Economy indicator lamp (green)
Remote control signal receiver and Manual Auto button
Operation indicator lamp (green)
Timer indicator lamp (orange)
3. INSTALLATION WORK
3.1. Installing the IR receiver unit
(1) Mount the IR receiver unit in the corner of the decoration panel (opposite
to the drainpipe) that has the "DISPLAY" mark.
The IR receiver unit must be mounted onto this corner.
PART No. 9378782198
For holding the remote controller
1
Use for air conditioner operation
1
For remote controller
2
For installing remote controller
holder to wall
2
For electrical wiring
2
CAUTION
En-1