Siemens SIMATIC AFD4 Product Information page 41

Bus links active field distributors
Table of Contents

Advertisement

Interfaces
PROFIBUS PA
FOUNDATION Fieldbus H1
Connections
Main cables
Quantity
Connection terminals (internal)
Cable gland (enclosure)
Cable type
Automatic bus termination
Maximum permitted continuous current on main
line
Y, field bus connection
Number n
Number of connectable field devices
Connection terminals
Cable gland
Cable type
Short-circuit proof
Intrinsically-safe acc. to FISCO
Max. total current at Y
Debounce logic
Maximum continuous output voltage
Max. current output to field devices
Grounding
Direct grounding
Interrupts, diagnostics, status information
Status display
Interrupts
Diagnostics function
Diagnostic indicator LED
Active field distributors AFD4, AFD4 (FM), AFD8 and AFS
Product Information, 02/2015, A5E03775304-AC
3.6 Technical specification of active field distributors AFS (6ES7157-0AG80-0XA0)
Power loss, max.
Min. cable diameter
Max. cable diameter
Min. conductor cross-section
Max. conductor cross-section
Min. cable diameter
Max. cable diameter
Min. conductor cross-section
Max. conductor cross-section
Technical specifications
2.13 W
Yes
Yes
2
Screw-type terminals (2-pin)
M16
Type A
4 mm
9 mm
0.2 mm
2
2.5 mm
2
No
1 A
Max. 2, with bus termination resistor at the end of
the line or on the FDC 157
31
Screw-type terminals (2-pin)
M16
Type A
4 mm
9 mm
0.2 mm
2
2.5 mm
2
Yes; in conjunction with FDC 157
No
1 A; limited by FDC 157
No
32 V
1 A
Via connection bar
Yes
None
Yes
Yes
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simatic afd4 (fm)Simatic afsSimatic afd8

Table of Contents