Device Address And Device Name; Read Area, Line And Device Address - Siemens RXB Series Basic Documentation

Introduction
Start page:
Selecting the main
menu
Note
Main menu
Note
Path to the "Basic
settings" page
Device information
For internal use only
Siemens
Building Technologies
4

Device address and device name

4.1 RM... controllers
The RMZ790 and RMZ791 operator units are identical for the purpose of access to
the RM... controllers and in terms of their application and functions.
The RMZ792 bus operator unit, with same design as the RMZ791, is used for
remote access to the Synco 700 bus devices, but differs substantially in terms of
application and functions from the RMZ791 and RMZ791 operator units.
4.1.1

Read area, line and device address

The area, line and device address are factory-set in the RM... controllers. The
settings can be read with the RMZ790, RMZ791, and RMZ792 operator units at the
Service level (indicated by the
From the start page, press the OK knob for access to the "Main menu" (see below).
Wednesday 28.05.2013
Welcome
« Information
Main menu »
On delivery from the factory, the start page displays the word "Welcome" instead of
the device name.
Main menu
Time of day/date...
Faults...
Settings
Device information
The bottom of an operating page is indicated by the "Arrow Up" symbol. To access
the top of the page, turn the knob counter-clockwise.
The path to access the "Basic settings" page containing the factory-set addresses
is as follows:
Main menu > Device information > Communication > Basic settings
Device information
Controller...
Extra configuration
Communication...
KNX bus communications
Device address and device name
symbol).
15:06
29 / 88
CE1P3127en
2013-04-08