Siemens RXB Series Basic Documentation page 31

Assign device names
Action
Notes
For internal use only
Siemens
Building Technologies
We recommend that the device name be defined at the design engineering stage.
To assign a name, select the Service level
Main menu > Settings > Texts
Texts
Dv name:
Write the text, via the "Texts" page and the line "Dv name" (= Device names):
Turn the knob as required to access the "Device name" page.
Turn the knob clockwise and select a character.
Press the knob to import the selected character to the text line.
Save the text line in the device:
Turn the knob counterclockwise until the
Press the knob to save the text line in the device.
Press ESC (repeatedly) to return to the start page, and check the device name.
The device name may contain up to 21 alphanumeric characters (maximum 21
characters including spaces)
Device names cannot be assigned to the Synco 700 RMZ78x extension modules.
A device name can be assigned to each device at the same time as the device
address via ACS790.
KNX bus communications
Device address and device name
and the following path:
OK
field is displayed.
31 / 88
CE1P3127en
2013-04-08