Introduction; Purpose Of This Document; History; Purpose - Siemens SIPROCESS GA700 Compact Operating Instructions

Introduction

1.1

Purpose of this document

These compact operating instructions are a brief summary of important features, functions
and safety instructions, and contains all information required for safe use of the device.
These are instructions on mounting, connecting, commissioning, operation, servicing,
dismantling and decommissioning of the device.
The compact operating instructions are intended for qualified personnel who have been
instructed in all the work on the device in hazardous areas and possible dangers resulting
from improper behavior and have been taught.
It is your responsibility to read the compact operating instructions thoroughly and understand
them before beginning any work. To guarantee correct handling, you should become
acquainted with the principle of operation of the gas chromatograph.
The compact operating instructions belong to the device. Keep them in the direct vicinity of
the device.
To achieve optimum usage of the device read the detailed version of the operating
instructions, see "References (Page 106)".
1.2

History

The following table includes information on the different editions of this document.
Edition
10/2014
05/2015
05/2018
1.3

Purpose

The device is designed for the concentration analysis of gases in gas mixtures. Depending
on the installed analyzer module, different gases can be examined.
Use the device only for measuring/analysis of gas concentrations in gas mixtures according
to the information in section "Technical specifications (Page 83)".
Note
This device meets the requirements of NAMUR Recommendation 53.
Devices in explosion-proof design
Compact Operating Instructions, 05/2018, A5E35134047-03
Remark
First edition
Expansion commissioning. Correction of the internal document links
Expansion with new analyzer modules: ULTRAMAT 7 and CALOMAT 7 as well as high-
temperature variants of OXYMAT 7 and ULTRAMAT 7.
Expansion and updating of the document
1
7