Operating Elements - Silvercrest SZP 40 C2 Operating Instructions Manual

CAUTION! PROPERTY DAMAGE!
Before use, ensure that there are no foreign bodies in the
►
sieve or in the appliance .
Stop the pressing process immediately if the pressing cone
►
is straining or does not turn at all . Unplug the appliance and
check whether there are any foreign bodies inside it .
Make sure that you do not block or overload the motor .
►
Do not press down excessively hard on the pressing cone .
Do not attempt to turn the pressing cone or the drive shaft
►
manually .
Place the appliance on a stable, level surface .
►
Do not use aggressive, abrasive or chemical cleaning agents
►
to clean the surfaces .

Operating elements

Lid
Pressing cone with sieve
Juice container
Juice outlet
Drive shaft
Motor unit
Cable compartment
SZP 40 C2 GB │ IE │ NI │ 7 ■