Dg Safety; Basic Requirements; Fire Prevention; Transportation Precautions - Huawei PowerCube 500 User Manual

PowerCube 500 (CPS300-N18A1H)
User Manual

1.8 DG Safety

1.8.1 Basic Requirements

To ensure safe and reliable operating of equipment, properly maintain and service the
equipment. The only way to avoid personal injury and damage to equipment is strictly
following operation rules and safety regulations.











1.8.2 Fire Prevention





1.8.3 Transportation Precautions

Requirements Before Transportation

Issue 02 (2019-08-30)
Before installing, operating, and maintaining a diesel generator (DG), read the
instructions provided by the DG vendor. The safety precautions specified in this
document are highly important precautions that require special attention. For additional
safety precautions, see the instructions provided by the DG vendor.
The DG is used only for purposes specified by the manufacturer. When the DG is used
for other purposes, you must obtain prior approval from Huawei even if the operation
does not violate safety regulations.
Ground the DG properly. Lock all electric panels. Use insulated tools to check and repair
electric devices. Avoid electric shocks in wet environments.
Follow all electrical regulations. Only qualified personnel are allowed to install, check,
and repair electric parts of equipment.
Do not operate the DG before reading and understanding the instructions and warnings
provided by the DG vendor. Otherwise, personal injury may occur.
Before performing installation or maintenance, put on a safety helmet, goggles, and other
protective equipment to avoid personal injury.
During installation and maintenance, strictly follow the instructions provided by the DG
vendor to avoid burns, explosions, and fire.
Take off your ID card and jewelry before installation and maintenance. Tie your hair and
put them in your hat to protect them from being twisted into high-speed moving
components (such as a fan or drive bearing), avoiding personal injury or death.
Keep sparks, open flame, and any other flammable objects away from the DG.
Changing original components or using non-original components without authorization is
prohibited. Otherwise, safety may be endangered.
Metal objects can result in short circuits, which may cause fire.
Keep the engine clean because excessive oil stains may cause engine overheat, which
leads to fire and damage to equipment.
Place multiple dry powder or CO
Survey the site and design a transportation scheme to ensure smooth transportation.
Copyright © Huawei Technologies Co., Ltd.
fire extinguishers besides the DG.
2
1 Safety Precautions
15