3
ICP DAS I-7520 converter
3.1
I-7520 mechanical dimensions
Building Technologies
Fire Safety & Security Products
If one of the RS232 line is used on the NK822x to connect the DF8000 units, a
conversion from RS232 to RS485 standard is required. Various suitable devices
are available on the market. The recommended model is the I-7520 converter by
ICP DAS Data Com
(http://www.icpdas.com/products/Remote_IO/i-7000/i-
7520.htm), which provides for the electrical conversion and isolation as well as for
the automatic
baud rate and data format detection.
Fig. 5
ICP DAS I-7520 Converter
The I-7520 appears as a compact plastic box that mounts on industry standard
DIN rail.
The following connections are provided:
•
Standard 9-pin female connector (DE-9):
RX, and GND.
•
Screw
terminals: RS485 line (towards DF8003): TX/RX pair.
•
Screw
terminals: DC power lines from the included 230 VAC adapter.
Width
Height
Depth
Tab.4.
I-7520 mechanical dimensions
RS232 line (towards NK822x): TX,
123 mm
72 mm
33 mm
048_DMS_DF8000_ICC_MP4.15_A6V10081388_c_en.doc
13
06.2008