Table of Contents
Advertisement
DK424 Release 4.0 Upgrade Programming Example
Program * 33
If the Back Room telephone (PDN 119) is programmed as the Owner of PhDN 500, the data in
Program * 33 must shift:
Before the Upgrade
PhDN Port 500 is owned by Port 019
Programs 39, 29, * 29, and 59
When a port number shifts from XXX to YYY during an Release 4.0 upgrade, the following
Program changes must be made:
In Program 39, the data set for port XXX must be copied over the data set for port YYY.
In all Telephone/Console button programs, the appearances of the XXX port PDN/SDN
Button (##XXX) and DSS Button (#XXX) must be changed to ##YYY and #YYY,
respectively, on all keystrips.
Example: The Front Office Telephone changes from port 012 to port 008 during the
Release 4.0 upgrade (see
As shown below, all the button functions of the Front Office Telephone do not change after the
upgrade, but the Program 39 codes for PDN, SDN and DSS buttons change if the associated
PDN/SDN or DSS port shifts. Also PhDN, Speed Dial, and Feature button codes do not
change when ports shift.
10-Button Keystrip for Front Office
Telephone on Port 012 -Before Upgrade
Key No.
K10
K09
K08
K07
K06
K05
K04
K03
K02
K01
Programs *42-1 and *42-2
Although this example does not include an RDTU (T1) PCB, it should be noted that these
programs require an RDTU slot number entry with DK Release 4.0. DK Admin/DK Backup
automatically inserts the correct slot number for these programs during the upgrade process.
160
–––––––––––––––––––––––––––––––––––––––––––––––––––
PhDN Port 500 is owned by Port 015
Figures 33
and 34).
Code
Name
497
SDS
498
DND
*103
SD103
*102
SD102
*101
SD101
#017
DSS117
##500
PhDN 500
##019
SDN 119
#000
DSS100
##012
PDN 112
After the Upgrade
10-Button Keystrip for Front Office
Telephone on Port 008 -After Upgrade
Key No.
Code
K10
497
K09
498
K08
*103
K07
*102
K06
*101
K05
#013
K04
##500
K03
##015
K02
#000
K01
##008
DKAdmin/DKBackup
Name
SDS
DND
SD103
SD102
SD101
DSS117
PhDN 500
SDN 119
DSS100
PDN 112
Advertisement
Table of Contents
