Table of Contents
Advertisement
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
To assign more than one speed dial number
1. Follow the procedure for changing an assigned feature and assign a station/system speed
dial number.
2. Press F8– + SD to add additional speed dial key assignments.
Important!
DSS Console Button Assignments
To access the option
Highlight the DSS
Console Button
Assignments option
and press Enter. The
DSS Console Button
Assignments screen
displays (shown right)
which enables you to
assign features to 20
DSS console key
buttons.
To reset all keys and return them
to their default settings
1. Press F5. A message displays: Are you sure you want to reset flexible
keys?
2. Highlight Yes and press Enter to reset the keys or press Enter to terminate the
resetting.
To change an assigned feature
1. Highlight the key
assignment you wish to
change and press F6. A
feature pop-up list
displays (shown right).
2. Highlight the feature you
want to assign to the
button and press Enter.
Some entries (such as the
CO Line feature) require
you type a value when
making an assignment.
Administration Menu (DKAdmin)
You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message Must
Assign System/Station Speed Dial First displays.
If you leave the cursor in the same field and continue to press F8, the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing F8.
Flexible Button Programming Section
65
Advertisement
Table of Contents
