Toro Greensmaster TriFlex 3320 Installation Instructions Manual page 4

1. Bracket
23. Connect the ground terminal connectors (J06 and J08)
to the ground block.
24. Use cable ties to secure the wires to the main machine
harness and to the machine frame.
Important: Ensure that the wires are away from
moving parts.
25. Secure the harness to the machine frame behind the
fuel-tank bracket and in front of the fuel-tank bracket.
26. Use cable ties to secure the new harness.
Important: Ensure that the wires are in a position
where the seat assembly does not crush them.
Figure 10
1. Generator plug
2. Terminals to main harness
3. Terminals to reel 2
Figure 9
2. Wiring harness
4. Terminals to reel 1
5. Terminals to reel 3
Installing the Fuse-Block
Bracket
1. Loosen the 2 nuts and bolts securing the right side of
the ROPS to the frame of the machine
1. Bracket
2. Fuse block
2. Align the slots in the fuse-block bracket with the bolts
as shown in Figure
3. Torque the ROPS fasteners to 136 to 149 N-m (100
to 110 ft-lb).
4. Use the 2 screws to secure the fuse block to the bracket
(Figure 11).
4
(Figure
Figure 11
3. Screws
4. ROPS bolts
11.
11).