g
Marking and Drilling Holes (2)
Place the equipment on the wall and then mark the positions of the holes for installing mounting ears.
Remove the equipment and drill the holes at the marked positions.
Mark the hole positions.
NOTE
When wall-mounting the chassis, place the fan assembly in the lower part of the chassis for heat dissipation.
h
Installing the Chassis on the Wall
Big flat washer
Small flat
Nut
washer
Fan assembly M6x60 expansion bolt
i
Installing PGND Cables
M4
1.4±0.14 N· M
15
Drill 8 mm diameter
holes with a depth
8
ranging from 52
mm to 60 mm.
PGND cable