Huawei OptiXRTN 950 V100 Quick Installation Manual page 41

Appendix
Connecting Cables to a Power Cable Connector
3
Connecting Cables to the Power Cable Connector
Route a cable into the pow er cable
1
connector.
Fasten the cable.
2
Caution
After fastening a cable, check whether the cable core is exposed outside the power cable
connector terminal. If the cable core is exposed, re-route the cable into the power cable
connector. If the cable core is still exposed after you re-route the cable, peel the cable again.
After the power switch is turned on, sparks may be generated at the exposed cable core when
an inappropriate operation is performed.
Slide the pow er cable connector's cover to close it.
4
Power Cable
Cable
Connector Terminal
- -48 V power cable (blue)
+
0 V ground cable (black)
Pull the cable slightly. If the cable is loose, fasten it
3
again.
M3 screw
Connecting cables to the pow er cable
5
connector is complete.
38
Pull the cable
slightly.
The cover is closed.
All the cables are
fastened, and no
cable core is
exposed outside the
pow er cable
connector.