Measuring Object Temperatures - Silvercrest 322247 Instructions For Use And Safety Notes

If you have activated Bluetooth
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
Note: The "HealthForYou" app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter "transfer-
ring measured values".
The device switches off automatically after 60 seconds, or press the
ON / OFF / MEASURE button
Clean the device after every use as described in the chapter
"Cleaning and care".

Measuring object temperatures

To switch on the multi-function thermometer, press the ON / OFF /
MEASURE button
Then press the M button
for 3 seconds to change to the object temperature mode. appears
on the LCD display.
Point the sensor tip towards the object
or the liquid to be measured (never
immerse in liquids!) at a distance of 3 cm
and press the ON / OFF / MEASURE
button for 1 second.
8
Release the ON / OFF /
measurement is possible after
approx. 5 seconds.
54 GB/IE
data transfer, the data will be
®
during transfer.
®
for 5 seconds to switch it off.
8
for one second.
8
and the S button
9
MEASURE button
ured value appears on the display
and the end of measurement is indi-
cated with a short beep (when the
key tone is activated). The next
at the same time
7
3 cm
. The meas-
8