Table of Contents
Advertisement
Chapter 5
Technical Specifications
Maximum Switching Voltage
220 VDC
250 VAC
Section 5.3
Copper Ethernet Port Specifications
Data Port
Media
Distance
Connector Type
Section 5.4
Fiber Optic Ethernet Port Specifications
The following details the specifications for fiber Ethernet ports that can be ordered with the RUGGEDCOM RS969.
Fast Ethernet Optical Specifications
Mode
Connector
SM
LC
SM
LC
SM
LC
MM
LC
c
Typical.
Gigabit Ethernet Optical Specifications
NOTE
• All cabling is duplex type unless otherwise specified.
• Maximum segment length is greatly dependent on factors such as fiber quality, and the number
of patches and splices. Consult a Siemens sales associate when determining maximum segment
distances.
• All optical power numbers are listed as dBm averages. To convert from average to peak, add 3 dBm.
To convert from peak to average, subtract 3 dBm.
26
Rated Switching Current
10/100 Mbps
CAT-5 UTP or STP
100 m (328 ft)
RJ45 or M12
Cable
c
Tx λ (nm)
Type (µm)
9/125
1300
9/125
1300
9/125
1300
50/125
850
0.24 A, 60 W
0.25 A, 62.5 W
Tx (dBm)
Sensitivity
Min
Max
(dBm)
-15
-8
-32
-5
0
-35
0
5
-37
-22.5
-14
-31
Isolation
Rx
Rx
Typical
Saturation
Distance
(dBm)
(km)
-3
20
3
50
0
90
-14
2
Copper Ethernet Port Specifications
RUGGEDCOM RS969
Installation Guide
Power
Budget
(dB)
17
30
37
8.5
Advertisement
Table of Contents
