Huawei PowerCube 500 V200R001C10 Quick Manual page 2

2
Tools
3
Routing Cables Through the Pole
1. Place the pole on a wooden case or a similar object.
2. Route a pull wire.
3. Route cables.
Routing Cables Through
the Grid Hybrid Pole
Mains AC cable Module
and optical fiber ground cable
Routing Cables Through
the Solar Hybrid Pole
Module
Mains AC
ground cable
cable and
optical fiber
Routing Cables Through
the Cantilever
Mains AC cable, module
ground cable, optical fiber,
camera cable, and CPE cable
Mains AC cable, module
ground cable, optical
fiber, camera cable, CPE
cable, and PV cable
Camera
ground cable
Bullet camera signal
cable, power cable,
and ground cable
2
CPE cable
Dome camera signal cable,
power cable, alarm cable, and
ground cable
NOTE
 CPE cables can be used only in scenarios where
CPE is adopted.
 The cables routed from the pole cable hole have
a length of 1.5 m reserved. The cables routed
from the cantilever cable hole have a length of
0.5 m reserved.
 The object where the pole is placed should be
able to bear a load above 700 kg.
CPE cable
Camera signal cable,
power cable, and
alarm cable
PV DC input cable
Camera signal cable,
power cable, and
alarm cable