Power Trim And Tilt Switch On Digital Electronic Control - Yamaha F250B Owner's Manual

With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
OFF
OFF
ON
OFF START
" (start) po-
" (on) position.
ON
START
ZMU06245
ON
START
ZMU04567
ON
OFF START
ZMU05821
ON
OFF START OFF
EMU35153
Power trim and tilt switch on digital
electronic control
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pressing the switch "
board motor up, and then tilts it up. Pressing
the switch " " (down) tilts the outboard motor
down and trims it down. When the switch is re-
leased, the outboard motor will stop in its cur-
rent position. For instructions on using the
power trim and tilt switch, see pages 59 and
61.
UP
DN
Components
ON ON
START OFF START
ZMU07340
" (up) trims the out-
ZMU06234
25