Operation
EMU35516
Procedure for tilting down (power trim
and tilt models)
1.
Push the power trim and tilt switch "
(up) until the outboard motor is supported
by the tilt rod and the tilt support lever be-
comes free.
2.
Release the tilt support lever.
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to the
desired position.
DN
DN
64
"
DN
DN
"
ZMU06258
EMU28061
EMU32871
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM01490
NOTICE
If the engine speed is suddenly in-
G
creased when the outboard motor is par-
ZMU05840
tially tilted up, the power trim and tilt unit
could be damaged.
DN
DN
Shallow water
ZMU05841
ZMU06021