Advertisement
Installing the Brush Guard
For MDX Models
Note:
Install all fasteners loosely.
1.
Install the short upper brush-guard bracket
through the bumper
1. Short upper brush-guard
bracket
2. Bumper-support bracket
2.
Open the hood.
3.
Secure the bumper-support bracket using 2 nuts
(5/16 inch) as shown in
4.
Close the hood.
5.
Install the brush-guard bracket to the brush
guard using 4 bolts (5/16 x 3/4 inch) and 4 nuts
(5/16 inch) as shown in
1. Bolt (5/16 x 3/4 inch)
2. Brush guard
(Figure
6.
Figure 6
3. Nut (5/16 inch)
Figure
6.
Figure
7.
Figure 7
3. Brush-guard bracket
4. Nut (5/16 inch)
6.
Install the lower brush-guard bracket to the
bumper-support bracket using 4 bolts (3/8 x 1
inch) and 4 nuts (3/8 inch) as shown in
and
Figure
g033822
1. Nut (3/8 inch)
2. Bumper-support bracket
1. Nut (3/8 inch)
g033823
3
9.
Figure 8
3. Bolt (3/8 x 1 inch)
4. Lower brush-guard
bracket
Figure 9
View from Below
Figure 8
g033890
g033891
Advertisement
