Toro 07145 Installation Instructions page 4

7. Install the brush guard to the short upper
brush-guard bracket using 2 carriage bolts and
2 nuts (5/16 inch) as shown in
Figure 10
1. Carriage bolt
2. Short upper brush-guard
bracket
3. Brush guard
8. Torque the fasteners securing the lower
brush-guard bracket to the bumper-support
bracket to 37 to 45 N∙m (27 to 33 ft-lb).
9. Torque all remaining fasteners to 198 to 254
N∙cm (175 to 225 in-lb).
Figure 10.
g033819
4. Carriage bolt
5. Nut (5/16 inch)
4