Using The On-Screen Display; Using Your Remote Control With The Osd - Dell W2600 Owner's Manual

Using the On-Screen Display

Your wide LCD monitor has an on-screen display (OSD) that allows you to select the proper input
source, make adjustments to the image and audio settings, select to view Picture-In-Picture,
Picture-Outside-Picture, and Picture-By-Picture. The OSD also allows you to chose how to view the
images when using the card reader and to make adjustments to the image if you are using the wide
LCD monitor as your computer monitor.

Using Your Remote Control With the OSD

NOTE:
You can access and make selections to the OSD using the volume and channel buttons on the
side panel of the wide LCD monitor or the remote control. Except where noted, this section describes
how to use the OSD with the remote control.
To enter the OSD, press the Menu button.
1
Eight icons appear along the bottom of the screen.
MAIN MENU
EXIT
PICTURE AUDIO
INPUT
SELECT
Use the left and right buttons (volume buttons) to move between the icons.
2
The icon appears highlighted as you move through the menu.
To select an option, push the Enter button when the icon is highlighted.
3
In the option menu, use the up and down (channel) buttons to move through the various
4
settings.
NOTE:
A red arrow appears next to the setting as you navigate through the options. A check mark
appears next to the option that is selected.
Use the up and down buttons (channel buttons) and the Enter button to adjust or select
5
settings.
NOTE:
You can select Exit to return to the main menu or press Menu to exit the OSD.
SIZE
PIP/POP SLEEP
PBP TIMER
SETUP
Using the On-Screen Display
4
73