Osd Setup; Card Reader - Dell W2600 Owner's Manual

OSD Setup

OSD setup allows you to adjust the appearance of the OSD, set the channels when in wide LCD
monitor mode, change the language of the OSD (see "Selecting Your OSD Language" on page 74),
and restore factory settings.
SETUP
BACK
OSD SETTINGS
CHANNEL SETUP
LANGUAGE
FACTORY RESET
DVI SETTINGS
If you are using the DVI connector, you may need to verify the following settings:
Source — The default setting is Auto. The wide LCD monitor automatically detects if a computer
(PC) or video device is being used. If the image does not display correctly, you can select the
source, PC or Video, depending on the device you are using.
Color — The default color space is RGB. If the colors are not displaying correctly, you can change
the setting to YUV.

Card Reader

A card reader allows you to view digital photos on your wide LCD monitor .
MAIN MENU
EXIT
SELECT
78
Using the On-Screen Display
INPUT IMAGE PICTURE
MGMT
Use OSD Hold Time to increase or decrease the amount
of time the OSD appears. The maximum amount of time
is 60 seconds.
In the OSD Setup menu, you can select TV Button Lock
to lock the buttons on the side panel. When this option is
enabled, only the power button functions. Hold the
volume increase and the channel increase buttons
together for 10 seconds to unlock the buttons.
To program a remote control key number for a specific
channel and select the number that displays on the
screen, select Channel Assignment from the Channel
Setup menu.
PIP/POP SIZE
COLOR
PBP
SETTINGS
SETUP