Osd Messages - Dell W2600 Owner's Manual

OSD Messages

While using your wide LCD
Message
Auto Adjust
Out of Range
No Video Input
TV Button Lock
In Power Save Mode
Press any key on keyboard or move mouse
In Power Save Mode
Please Check Video Signal
Self Test
86
Troubleshooting Your Wide LCD Monitor
onitor , the following messages may appear.
m
Possible Solution
No action required, the wide LCD monitor is
performing an auto adjustment.
Check the optimal resolution settings.
You may need to download a new video driver. For
more information, go to support.dell.com.
Check all cables are properly connected.
1
Ensure the proper source is selected in the Input
2
Select menu. See "Input Select Menu" on page 74
for more information.
To unlock, press Menu on your remote control, select
Setup.
If you are unable to use the remote control, press the
volume up and the channel up buttons on the side of
the wide LCD monitor for 10 seconds to unlock the
buttons.
If you have a computer connected to the wide LCD
monitor and there is no signal detected, the wide
LCD monitor goes in to sleep mode. The power
light is amber when the wide LCD monitor in is
sleep mode.
Press any key on the keyboard or move the mouse to
wake the wide LCD monitor .
If you are using a video device and it has been
inactive for 30 minutes the wide LCD monitor goes
in to power save mode. The power light is amber
when the wide LCD monitor is in power save mode.
Appears for computer source when there is nothing
plugged in. Select VGA or DVI from Input Select
menu and nothing is plugged in. Plug a computer in
to the VGA or DVI.