Table of Contents
Advertisement
Verifying the system (Continued)
T
2:
ABLE
Conditions to verify
• Motherboard, including components and traces, appears
undamaged, and no foreign objects are evident.
• CPU is present, well-seated, and appears undamaged.
• CPU cooling assembly is well-aligned and firmly attached.
• Each fan required (including fan cable) is well-positioned
(not upside down), installed in the correct connector, and
appears undamaged.
• Boards required on the motherboard are present, well-seated,
and in the correct slots.
• Each DIMM is well-seated.
• Battery is installed.
• BIOS is well seated.
• Each DIMM is well-seated.
• DIMM edge connectors are not oxidized.
Each board required is:
• Present
• Installed in the correct slot
• Well-seated
• Appears undamaged
Required cables (if applicable) are:
• Present
• Firmly connected in the correct connectors
• Not visibly damaged
User interface board (UIB) is:
• Present
• Correctly attached to its bracket
• Appears undamaged
UIB cable is:
• Present
• Firmly connected in the correct connector on the
motherboard and the back of the UIB
• Not visibly damaged
T
ROUBLESHOOTING
Part and additional page references
Motherboard (with the Fiery Options Utility DVD
and one-time use dongle),
page
I
MPORTANT
replacing the motherboard,
carefully review the
cautions on
DIMMs for ColorPASS,
page 76
Copier interface board,
page 55
User interface board,
page 57
116
60.
When
:
.
page 60
Advertisement
Table of Contents
