Table of Contents
Advertisement
U
SING THE
Starting, shutting down, restarting, and rebooting
The customer will generally leave the ColorPASS on all the time. Remember that when the
ColorPASS is powered off, network access to the copier is interrupted. Power off the
ColorPASS when you need to service it and before you remove or attach any cables to it.
Definitions
•
Restart Server (soft reset)
entire system. Network access to the ColorPASS is temporarily interrupted and all
currently processing jobs are aborted and may be lost.
•
Reboot System (hard reset)
•
Shut Down System
Always select this option to power off the system.
N
:
Use the reset button on the front of the ColorPASS only if the system is unresponsive
OTE
to keyboard or mouse actions.
T
C
O START THE
OLOR
• Power on the ColorPASS by pressing the power button on the front panel.
The power supply automatically senses the correct voltage. Allow startup to proceed without
interruption. Do not press any buttons on the Control Panel while the system is starting.
T
,
O SHUT DOWN
RESTART
1 Make sure that the Info screen on the copier touch panel displays Idle (see
If Printing or Processing appears on the touch panel, the ColorPASS is processing. You must
wait until the system finishes and reaches the Idle state.
If the system has just finished processing, wait at least five seconds after the system reaches
Idle before beginning the shutdown procedure.
N
:
Notify the network administrator before you remove the ColorPASS from
OTE
the network.
2 At the ColorPASS Control Panel, press the Menu button.
3 Select Restart Server, Shut Down System, or Reboot System.
Eject CD/DVD
Restart Server
Shut Down System
Reboot System
Functions
Before accessing internal components, make sure that all cables are disconnected from the
back of the ColorPASS.
C
PASS
OLOR
resets the ColorPASS server software, but does not reboot the
shuts down all ColorPASS activity properly, and then reboots.
shuts down all ColorPASS server software and powers off the system.
PASS
,
C
OR REBOOT FROM THE
Use the line selection button to the right to select
Restart Server, Shut Down System, or Reboot System.
PASS C
P
OLOR
ONTROL
ANEL
41
page
35).
Advertisement
Table of Contents
