Advertisement
Figure 7
1. Mount plate
2. ECU
3. Bolt (1/4 x 2-1/2 inch)
4. Lock washer (1/4 inch)
6. Connect the relay leads on the wiring harness
to the 6 relays on the mounting plate (Figure 7).
7. Connect the 2 controller leads (one long and
one short) on the wiring harness to the ECU
(Figure 7).
8. Install the mount plate to the vehicle frame,
under the dash.
A. For the Multi-Pro 1200 and 1250, install
the mount plate using 2 bolts (5/16 x 3/4
inch) and 2 lock washers (5/16 inch) as
shown in Figure 8.
Figure 8
1. Mount plate
2. Vehicle frame
5. Nut (1/4 inch)
6. Wiring harness
7. Relay leads
8. Controller leads
3. Bolt (5/16 x 3/4 inch)
4. Lock washer (5/16 inch)
B. For the Multi Pro 5600 and 5700 install the
mount plate using 2 bolts (5/16 x 3/4 inch)
and 2 lock washers (5/16 inch) as shown
in Figure 9.
Figure 9
1. Mount plate
2. Vehicle frame
C. For the Workman 200 Spray System, install
the mount plate using 2 U-bolt clamps
(5/16 x 3/4 inch) 2 nuts (5/16 inch) and
2 lock washers (5/16 inch) as shown in
Figure 10.
Figure 10
1. Vehicle frame
2. Mount plate
3. U-bolt assembly
6
3. Bolt (5/16 x 3/4 inch)
4. Lock washer (5/16 inch)
4. Lock washer (5/16 inch)
5. Nut (5/16 inch)
Advertisement
