Adjusting The Brush Height; Leveling The Core Processor - Toro ProCore Operator's Manual

1. Jack
Important: Make sure the tongue assembly is
retracted before disconnecting the processor
hitch tongue from the vehicle hitch.
9. Remove the lynch pin and hitch pin securing the
processor hitch tongue to the vehicle hitch.
9

Adjusting the Brush Height

No Parts Required
Procedure
Refer to Adjusting the Brush Height in the Operation
Section.
10

Leveling the Core Processor

No Parts Required
Procedure
Refer to Leveling the Core Processor in the Operation
Section.
Figure 24
19