Toro 2024 Operator's Manual page 4

Operation
Handheld Indicator Lights
The following table lists the various states of the indicator
lights on the handheld transmitter
meanings:
Indicator Light State
The TX indicator light is dim
and blinking rapidly.
The TX indicator light is bright
and blinking rapidly.
The RX indicator light is bright
and blinking rapidly.
The ER indicator light is lit
solid.
The BA indicator light is
blinking slowly.
Replacing the Transmitter
Batteries
1. Loosen the four screws securing the battery cover
(Figure 5).
1. Handheld transmitter
2. Battery cover
2. Remove the cover (Figure
(Figure 4) and their
Meaning
The handled unit is
transmitting to the receiver.
A button is active on the
handheld unit.
The handheld unit is receiving
transmission.
There is an error with the
transmission.
The batteries are low. See
Replacing the Transmitter
Batteries (page 4)
Figure 5
3. Screws
6).
1. Handheld transmitter
3. Remove the existing batteries.
4. Install 3 new, AAA batteries in the orientation shown
in Figure 7.
Important: Ensure that you install the batteries
in the correct polarity orientation or you could
damage the transmitter.
1. Handheld transmitter
5. Replace the cover and secure it with the screw removed
previously.
Tighten the screws enough to ensure that the sealing
gasket is compressed, but do not over tighten them.
4
Figure 6
2. Battery cover
Figure 7
2. AAA batteries