Troubleshooting - Beko BSS 4600 TT User Manual

5

Troubleshooting

Water dispenser isn't working.
• The appliance is not plugged into the socket.
• Fuse is blown or broke down.
Water coming out of the cold water tap isn't cold enough.
• Make sure that the cold water switch at the back is on.
• Water dispenser was not placed at a proper distance from the wall.
Water dispenser doesn't heat the water adequately.
• Make sure that the hot water switch at the back is on.
• There might be deposit formations (calcareous) on the surface of the heater in the hot water tank.
• Read the text regarding the cleaning of the water dispenser and put it into practice.
Compressor frequently starts and stops.
• Room temperature is above normal range.
• Water dispenser was not placed at a proper distance from the wall.
There is a vibration.
• Make sure that the water dispenser is placed in a balanced manner.
Water dispenser is making a lot of noise during operation.
• Noise might be due to the flow of the cooling agent.
• This is normal.
• You may hear a flowing sound at the end of each cycle.
• There might be rattling sounds due to the expansion and contraction arising from the heating and
cooling of the water tanks.
• Make sure that the water dispenser is placed in a balanced manner.
Water Dispenser / User Manual
14 / 14 EN