[8-14 Hydro Unit Maintenance Instructions ]
8-14-5
Solenoid Valve and LEV Body Replacement Procedure
Operation procedures
1) Remove all refrigerant from the pipes.
2) Remove the front panel (8 screws).
3) Remove the pipe cover.
4) Disconnect all wires connecting the control
box, solenoid valve, and LEV coil.
(See Steps 3 and 4 for the removal proce-
dure.)
5) Remove the braze from the areas circled in
the figure.
6) Replace the solenoid valve and the LEV
coil.
BS_08_E
(2)
(3)
Solenoid valve
(5)
Illustrations
Service panel (front)
LEV body
Pipe cover
125
chapter 8 -