Function Menu - Siemens SINAMICS G120 Application Description

6 Operation of the Application
6.2 Operation of the application with a panel
6.2.2.2

Function menu

Figure 6-2
From the Function menu, you can call the individual operating screens:
Table 6-1
Operating
screen
Power and Reset
Status
Error
MoveVelocity
MoveJog
Halt
SINAMICS G120 as a Speed Axis on the S7-1500
V1.0a, Entry ID: 78788716
Visualization of MC_Power and MC_Reset.
MC_Power is used to enable the axis (On/Off).
MC_Reset is used to acknowledge errors of the axis.
Visualization of the status bits of the Axis TO.
Visualization of the error bits of the Axis TO.
Visualization of MC_MoveVelocity.
This FB is used to start an (endless) axis motion at the specified
velocity.
Visualization of MC_MoveJog.
This FB allows you to "jog" the axis.
Visualization of MC_MoveHalt.
This FB is used to stop the axis.
Function
41