Troubleshooting; Disposal Of The Appliance - Silvercrest SSM 350 A1 Operating Instructions Manual

Troubleshooting

Fault
The appliance is not
working.
The blade 5 does
not rotate well or not
at all.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.

Disposal of the appliance

Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance through an approved disposal facility or your municipal
waste facility. Please observe the currently applicable regulations. Please contact
your waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
SSM 350 A1
Cause
The plug is not connected.
The appliance is defective.
The motor unit 3 and the blender 4
have not been assembled correctly.
The blade 5 is jammed.
The blended food is too tough or
firm.
The solution
Insert the plug into a mains
power socket.
Contact Customer Services.
Remove the plug from the
power socket and assemble
the appliance properly.
Remove the plug from the
power socket and remove
whatever object is blocking
the blade.
The appliance is not
suitable for processing hard
food.
GB │ IE │ NI │ CY │ 9 ■