Storage; Troubleshooting - Silvercrest 400106 2204 Operating Instructions Manual

1) Remove the power plug from the socket.
2) Remove the blender 4 from the motor unit 3. To do this, rotate the blender 4
towards the
3) Clean the motor unit 3 with a moist cloth.
Ensure that water does not enter the openings of the motor unit 3.
For stubborn dirt, add a little mild detergent to the cloth. Wipe off any
detergent residue with a damp cloth.
4) Thoroughly clean the blender 4 in soapy water, then rinse off the soap with
clear water.
5) Dry everything thoroughly and ensure that the appliance is completely dry
before using it again.

Storage

1) Clean the appliance as described in the section "Cleaning".
2) Store the cleaned appliance in a clean, dust-free and dry location.

Troubleshooting

Fault
The appliance is not
working.
The blade 5 does
not rotate well or not
at all.
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
SSM 350 B1
symbol and pull it off.
Cause
The plug is not connected.
The appliance is defective.
The motor unit 3 and the blender 4
have not been assembled correctly.
The blade 5 is jammed.
The blended food is too tough or
firm.
The solution
Insert the plug into a mains
power socket.
Contact Customer Services.
Remove the plug from the
power socket and assemble
the appliance properly.
Remove the plug from the
power socket and remove
whatever object is blocking
the blade.
The appliance is not
suitable for processing hard
food.
GB │ IE │ NI │ 9 ■