Storage; Troubleshooting - Silvercrest SSM 350 B1 Operating Instructions Manual

1) Remove the power plug from the socket .
2) Remove the blender 4 from the motor unit 3 . To do this, rotate the blender 4
towards the
3) Clean the motor unit 3 with a moist cloth .
Ensure that water does not enter the openings of the motor unit 3 .
For stubborn dirt, add a little mild detergent to the cloth . Wipe off any
detergent residue with a damp cloth .
4) Thoroughly clean the blender 4 in soapy water, then rinse off the soap with
clear water .
5) Dry everything thoroughly and ensure that the appliance is completely dry
before using it again .

Storage

1) Clean the appliance as described in the section "Cleaning" .
2) Store the cleaned appliance in a clean, dust-free and dry location .

Troubleshooting

Fault
The appliance is not
working .
The blade 5 does
not rotate well or not
at all .
If the malfunction cannot be corrected using one of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department .
■ 36 │ GB │ MT
symbol and pull it off .
Cause
The plug is not connected .
The appliance is defective .
The motor unit 3 and the blender 4
have not been assembled correctly .
The blade 5 is jammed .
The blended food is too tough or
firm .
The solution
Insert the plug into a mains
power socket .
Contact Customer Services .
Remove the plug from the
power socket and assemble
the appliance properly .
Remove the plug from the
power socket and remove
whatever object is blocking
the blade .
The appliance is not
suitable for processing hard
food .
SSM 350 B1