Silvercrest KH 2525 Operating Instructions Manual page 17

Troubleshooting
Defect
No sound
(continuation)
Poor sound quality,
heavy noise
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
Loudspeaker System KH 2525
Possible cause
The wall socket is not
supplying power.
The speakers are switched
off .
The rechargeable battery
packs in the speakers are
not charged.
The volume is set too low.
The transmission unit is not
connected to an audio
device.
Playback of the audio
device has not been started.
The switch is in the
13
wrong position.
The transmission frequency
is not set optimally.
The rechargeable batteries
are not suffi ciently charged.
The volume on the speaker
is not set correctly.
The distance between the
speakers and the trans-
mission unit is too great.
The input level of the audio
signal is too low.
Solution
Check the house fuse.
Switch the speaker on.
Charge the rechargeable battery
packs.
Set the volume to a suitable level.
Connect the transmission unit correctly.
Begin playback at the audio device.
When using the rechargeable battery
pack shift the switch
13
Charge, with other rechargeable
battery packs and/or batteries switch
to the position Normal.
Press the button SCAN
speaker.
Set to another channel and press the
button SCAN on the speaker.
15
Charge the rechargeable battery
packs.
Set the volume.
Reduce the distance between the
speakers and the transmission unit.
Increase the volume at the audio
device.
to the position
on the
15
19
GB