Switching On/Off And Adjusting The Volume; Switching The Led Lights On/Off; Connecting Headphones - Silvercrest 339086 1910 Operating Instructions Manual

Switching on/off and adjusting the volume
Turn the ON/OFF | VOL knob
♦
the device. The operating LED
device is switched on.
Turn the ON/OFF | VOL knob
♦
increase the volume.
Turn the ON/OFF | VOL knob
♦
crease the volume.
Turn the ON/OFF | VOL knob
♦
the device. The operating LED
device is switched off.
Switching the LED lights on/off
NOTE
The LED lights
houses.
♦ Set the LED ON / OFF switch
switch on the LED lights
♦ Set the LED ON / OFF switch
switch off the LED lights

Connecting headphones

DANGER
►
Make sure that the ON/OFF | VOL knob
♦
position.
♦ Plug the 3.5 mm jack plug of the headphones into the
headphone socket
♦ Before putting on the headphones, turn on the speakers
again and carefully increase the volume.
│ GB │ IE
■ 30
1
are not suitable for lighting rooms in
Loud music can lead to hearing damage!
Avoid extremely loud sound levels, especially
over long periods of time, when you are using
headphones.
3
4
clockwise to turn on
6
lights up as soon as the
4
further clockwise to
4
anticlockwise to de-
4
anticlockwise to turn off
6
goes out as soon as the
7
to the ON position to
1
.
7
to the OFF position to
1
.
.
4
is in the OFF
2
SPS 3 A1