ABB ScreenMaster RVG200 Battery Replacement Procedure page 3

5 Setting the time and date
Important note
Once the battery has been removed, the battery failed
icon is displayed on the front panel of the unit. To
restore normal operation, the correct time and date
must set.
To access the Configuration menus:
on the first Operator menus page.
1. Touch
2. Enter an operator password (if configured).
3. Select the Edit Configuration mode by touching the
button.
The System Configuration page is displayed:
4. Press Common.
The Common Configuration menu is displayed:
5. Select Time and press
box).
A warning dialog is displayed:
6. Press
The Date and time menu is displayed:
7. Set the required time and date using the instrument
touchscreen. Once finished, press
save the configuration as normal.
ScreenMaster RVG200 | Paperless recorder | Battery replacement | IN/RandC/006-EN Rev. A
(next to the Date and time
Important note
Changing the time will potentially cause loss of
data. Ensure that all data archiving is up to date
before proceeding.
.
and exit and
3