Toro Groundsmaster 360 Operator's Manual page 15

InfoCenter
The InfoCenter LCD display shows the operating
status, various diagnostics, and other information
about the machine (Figure
Important:
If the cutting unit shuts down and
the InfoCenter temperature-warning icon is on,
push the PTO knob down; drive to a safe, flat
area; move the throttle lever to the S
allow the traction pedal to move to the N
position; and engage the parking brake. Allow the
engine to idle for several minutes while it cools to
a safe level. Shut off the engine and check the
cooling system; refer to
System (page 58).
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine, such as the operating status, various
diagnostics, and other information about the machine
(Figure 9). There is a splash screen and main
information screen of the InfoCenter. You can switch
between the splash screen and main information
screen at any time by pressing any of the InfoCenter
buttons and then selecting the appropriate directional
arrow.
1. Indicator light
2. Right button
•
Left button, menu access/back button—press
this button to access the InfoCenter menus. You
can use it to back out of any menu that you are
currently using.
•
Middle button—use this button to scroll down
menus.
•
Right button—use this button to open a menu
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
8).
position;
LOW
EUTRAL
Checking the Cooling
Figure 9
3. Middle button
4. Left button
button is labeled with an icon displaying its current
function.
InfoCenter Icon Description
SERVICE DUE
g020650
15
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Fast
Slow
Stationary regeneration required
Glow plugs are active
AC
2-wheel steer
4-wheel steer
Operator must sit in seat
Parking brake indicator—indicates
when the parking brake is set
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
PTO is engaged
Denied or not allowed
Engine start
Stop or shutdown
Engine
Key switch
PIN code