Adjusting The Parking Brake; Belt Maintenance; Checking The Alternator Belt - Toro Groundsmaster 360 Operator's Manual

Adjusting the Parking
Brake
If the parking brake fails to engage, adjust the brake
pawl.
1. Loosen the 2 screws securing the parking-brake
pawl to the frame
Figure 85
1. Brake cables
2. Screws (2)
2. Press the parking brake pedal forward until the
brake detent completely engages on the brake
pawl (Figure 85).
3. Tighten the 2 screws locking the adjustment.
4. Press the brake pedal to release the parking
brake.
5. Check the adjustment and adjust it as required.
(Figure 85).
3. Parking-brake pawl
4. Brake detent

Belt Maintenance

Checking the Alternator
Belt
Service Interval: After the first 10 hours
Every 100 hours
1. Ensure that the proper tension allows 10 mm
(3/8 inch) deflection when a force of 4.4 kg (10
lb) is applied on the belt midway between the
pulleys.
2. If the deflection is not 10 mm (3/8 inch),
loosen the alternator mounting bolts
86). Increase or decrease the tension of the
alternator belt and tighten the bolts. Check the
deflection of the belt again to ensure that the
tension is correct.
g011617
1. Mounting bolt
60
(Figure
Figure 86
2. Alternator
g020537