Disassembly And Assembly Instructions; Access Pcb; Removing The Protecting Box - Panasonic NP-6R2MUQNZ-NZ Service Manual

3 Disassembly and Assembly Instructions

3.1.

Access PCB

3.1.1.

Removing the protecting box

The PCB can be removed from the protecting box in the bottom of machine.
1. Disconnect power supply.
2. Take out cutlery basket, basket and filter system.
3. Open the cover of bottom board.
4. Remove the screws for fixing protecting box and open the protecting box cap.
5. Disconnect the connector form PCB.
6. Remove the screws securing the PCB to control panel.
7. Remove the PCB.
8. Reverse the above procedure to install.
5