For Installer; Installation Instructions; Positioning The Dishwasher; Electrical Connection - Panasonic NP-6F1MLQ Operating And Installation Instructions

Installation Instruction

Positioning the Dishwasher

Position the Dishwasher in the desired location. The back should rest against the wall and
the sides must along the adjacent cabinets or walls. The Dishwasher is equipped with Inlet
Pipe and Drain Pipe that can be positioned either to the right or the left sides to facilitate
proper installation.
Levelling the Dishwasher
This appliance is necessary to allow disconnection from the supply after
installation. The disconnection may be achieved by having the plug accessible
or by incorporating a switch in the fi xed wiring in accordance with the wiring
rules.
Ensure proper ground exists for earth wire before installation.
Do not use an extension cord or an adapter plug with this Dishwasher.
Do not cut or remove the earthing connection from the power cord under any
circumstances.
Electrical Requirements
Look at the Name Plate to know the rating voltage and connect the Dishwasher to the
appropriate power supply. Provide a separate circuit serving only this Dishwasher.

Electrical Connection

Ensure the voltage and frequency of the power correspond to those on the Name Plate.
Only insert the Power Plug into an electrical socket which is earthed properly. If the
36
Dishwasher_NP-6F1MLQ.indb 36 Dishwasher_NP-6F1MLQ.indb 36
Once the Dishwasher is positioned for
levelling, the height of the Dishwasher may be
altered via adjustment of the screwing level of
the feet. In any case, the Dishwasher should
not be inclined more than 2 °.
Electrical Connection
WARNING

For Installer

7/19/2016 5:21:10 PM 7/19/2016 5:21:10 PM