Filling The Rinse Aid Dispenser - Panasonic NP-6F1MLQ Operating And Installation Instructions

Using the Dishwasher

Filling the Rinse Aid Dispenser

Rinse Aid Dispenser
The rinse aid is released during the fi nal rinse to prevent water from forming droplets on
the dishware, which can leave spots and streaks. It also improves drying by allowing water
to roll off the dishware. The Dishwasher is designed to use liquid rinse aids. The Rinse Aid
Dispenser is located next to the Detergent Dispenser. To fi ll the rinse aid, open the Cap and
pour the rinse aid into the dispenser until the level indicator turns completely black. The
volume of the rinse aid container is about 110 mL.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot
and streak free drying.
■
Attention:
• Only use branded rinse aid for Dishwasher. Never fi ll the Rinse Aid Dispenser with
any other substances (e.g. Dishwasher cleaning agent, liquid detergent). This would
damage the Dishwasher.
When Refi lling the Rinse Aid Dispenser
When the rinse aid container is full, the Rinse Aid indicator will be completely dark. As the
rinse aid diminishes, the size of the black dot decreases.
Never let the rinse aid level fall 1/4 full.
As the rinse aid diminishes, the size of the black
dot on the Rinse Aid Level indicator changes, as
illustrated below.
Full
3/4 full
1/2 full
1/4 full
- Should refi ll to eliminate spotting
Empty
Other than that, Rinse Aid indicator,
aid is empty.
14
Dishwasher_NP-6F1MLQ.indb 14 Dishwasher_NP-6F1MLQ.indb 14
on the Control Panel will light up when the rinse
Rinse Aid Level
indicator
Cap
7/19/2016 5:21:04 PM 7/19/2016 5:21:04 PM