Panasonic NP-6F1MLQ Operating And Installation Instructions page 4

Safety Precautions
Clean the Power Plug regularly
with dry cloth, otherwise, it may
cause insuffi cient insulation due
to moisture, and may cause fi re.
Do not open the door when
washing, because the hot water
may splash out.
The Dishwasher door should not
be left in the open position since
this could present a tripping
hazard.
Do not connect the power voltage
other than 220 V / 230 V / 240 V AC,
may cause fi re or electric shock.
Do not use an extension cord or an
adapter plug with this appliance.
Check that the detergent powder
is empty after completion of the
wash cycle.
Use only detergent and rinse
aids designed for an automatic
Dishwasher only.
Installation and servicing must be
carried out by competent persons
in accordance with the regulation
in force.
Before the appliance is put into
operation, all the protective fi lms
applied must be removed.
If overfl ow occurs, turn OFF the
main water supply before calling a
service.
4
Dishwasher_NP-6F1MLQ.indb 4 Dishwasher_NP-6F1MLQ.indb 4
Make sure to follow these instructions
WARNING
Do not damage the power cord or
Power Plug.
Do not cut or remove the earthing
connection from the power cord
under any circumstances.
Do not disassemble the unit for
reconstruction.
Do not discard the packaging
or any part of it, or leave it
unattended. It can constitute a
suffocation hazard for children,
especially the plastic bags.
CAUTION
The Dishwasher must never be
used without the fi lters. Improper
replacement of the fi lter may
reduce the performance level of
the appliance and damage the
dishware and utensils.
Please close the water tap after
using.
The appliance is to be connected
to the water mains by new
detachable hose-sets supplied
with the appliance. Old hose-sets
should not be used.
• The maximum inlet water pressure
is 1 MPa.
• The minimum inlet water pressure
is 0.04 MPa.
7/19/2016 5:21:01 PM 7/19/2016 5:21:01 PM