Access Inlet Valve - Panasonic NP-6R2MUQNZ-NZ Service Manual

3.2.

Access inlet valve

1. Disconnect power.
2. Remove the water inlet hose. (Note : Be careful of remain water drop.)
3. Remove the cover of the bottom board.
4. Disconnect the 2 terminal lugs from the inlet valve.
5. Pull out the valve a little then turn it in anti-clockwise direction it to take it off.
6. Remove the clamp and disconnect the inlet hose (to air breaker) from the water valve.
7. Reverse above procedures to install.
6