Setting Clock Manually - Manual Clock Set - JVC HM-DB1U Instructions Manual

12
EN
VCR CABLE
TV
/DBS
1 2
4 5
7 8
0
8
3
6
9
4 - 7
INITIAL SETTINGS (cont.)
Setting clock manually
— Manual Clock Set
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set time
Press [%fi] until the
desired time appears,
then press [OK] or [#].
● Holding [%fi] changes
the time in 30-minute
intervals.
● When the time is entered
manually, "AUTO CLOCK" is automatically set
to "OFF", and "HOST CH" and "TIME ZONE"
disappear.
5
Set date
Press [%fi] until the desired date appears, then
press [OK] or [#].
● Holding [%fi] changes the date in 15-day
intervals.
6
Set year
Press [%fi] until the desired year appears.
7
Select D.S.T. mode
Press [OK] or [#] to move the highlight bar to
"D.S.T.", then press [%fi] to select "ON" or
"OFF".
"ON"– Adjustment will be made by the built-in
clock itself.
"OFF"–Select when Daylight Saving Time does
not apply to you.
8
Start clock
Press [MENU] and normal screen appears.
To make corrections any time during the process
Press [OK] or [#] to select the item you want to change,
then press [%fi].
CLOCK SET
TIME DATE YEAR
--:--AM 1/ 1 04
AUTO CLOCK:ON
HOST CH :AUTO (CATV)
D.S.T. :AUTO
TIME ZONE :AUTO
PRESS( , ), THEN (OK)
PRESS(MENU) TO END