JVC HM-DB1U Instructions Manual page 8

D-vhs digital recorder
Table of Contents

Advertisement

8
EN
Digital Set Top Box Connection
• Connect VCR to Digital Set Top Box
a– Connect an i.LINK cable between the Digital Set Top Box's i.LINK input/output connector and your VCR's [i.LINK IN/OUT]
connector.
b– Connect an audio/S-Video cable between the Digital Set Top Box's audio/S-Video output connector and your VCR's
[AUDIO/S VIDEO IN] connector.
• Connect VCR to TV
a– Connect both the RF cable and the AV cables to the TV as explained in step 3 1 ~ 4 of 'Basic Connection'(
b– Connect an audio/S-Video cable between the VCR's [AUDIO/S VIDEO OUT] connector and your TV's audio/S-Video input
connector.
• Connect Digital Set Top Box to TV
a– Connect a component video cable between the Digital Set Top Box's DTV (component) output connector and your TV's
DTV input connector.
b– Connect an audio cable between the Digital Set Top Box's audio output connector and your TV's audio input connector.
To Audio Output
Connectors
Antenna or Cable
for digital broadcast
To Audio Output
Connectors
Audio Cable
(not supplied)
To [AUDIO IN]
R
Back of VCR
To [AUDIO OUT]
NOTES:
• If your TV does not have S-Video terminals, use a video cable.
• Use the commercially available i.LINK cable (4-pin, S400, below 3m). If the cable used is above 3m, this VCR will not fully
maximize its performance.
• To connect the antenna for the Digital Set Top Box, refer to the instruction manual for Digital Set Top Box.
• With [L-1] as the input connection, pictures from the Digital Set Top Box via i.LINK can be monitored when "STB MONITOR" is set
to "ON" (
pg. 38).
To DTV
(Component) Output
Connectors
Digital Set
Top Box
To
S-Video
To i.LINK
Output
Input/Output
Connector
Connector
Video Cable
(not supplied)
i.LINK cable
(supplied)
To
[S VIDEO IN]
To [i.LINK
IN
S VIDEO
IN(L-1)
IN/OUT]
AUDIO
VIDEO
L
VHF/UHF
ANTENNA
IN
OUT
IN
S VIDEO
S VIDEO
IN(L-1)
i.LINK IN/OUT
ANTENNA
S200
OUT
R
AUDIO
L
VIDEO
R
AUDIO
L
VIDEO
D THEATER
REGION 1
IN(L-2)
To
Matching Transformer
[S VIDEO
(not supplied)
OUT]
RF Cable (supplied)
S-Video Cable (not supplied)
Audio Cable (not supplied)
INSTALLING YOUR NEW VCR (cont.)
Component
Video Cable (not
supplied)
To DTV Input
Connectors
To 75 Ω terminal
Antenna or Cable
Coaxial Cable
Flat Feeder
pg. 7).
Audio Cable
(not supplied)
To Audio Input
Connectors
TV
(HD Ready)
To
To Audio
S-Video
Input
Input
Connectors
Connectors

Advertisement

Table of Contents
loading

Table of Contents