Toshiba V Series User Manual page 35

Chapter 6 Application Program
(3) CH1 main processing program
22
1st scan : Turn RX1_GO ON to activate receive processing.
Receive processing :
When receive complete and RX1_END turns ON, use the table
move instruction (TMOV) to transfer the content of RX1_DAT[0] -
[128] to TX1_DAT[0] ～ [128]. Then turn OFF RX1_END to
complete the receive processing and turn TX1_GO to activate the
transmit processing.
Transmit processing :
When transmit completes and TX1_END turns ON, turn
TX1_END OFF. Then turn RX1_GO ON to start the next receive
processing.
CH1_START RX1_GO
1
（S）
RX1_END
TMOV
2
EN
ENO
RX1_DAT
3
TBL
LD
128
N
4
LD
TX1_END
TX1_END
5
（R）
RX1_GO
6
（S）
RX1_END
（R）
TX1_DAT
TX1_GO
ST
（S）
model 2000 CIF module (CF611)User's Manual