Husqvarna 322HD60 Workshop Manual page 31

7. Use the clutch removal tool to remove the clutch.
The clutch has a left hand thread. Refer to
tools on page 10 .
8. Remove the clutch assembly.
9. Put the clutch assembly in a vise.
CAUTION: Use rubber brackets in the vise
to prevent damage to the clutch assembly.
10. Disassemble the clutch shoes from the hub with a
screwdriver.
11. Assemble in the opposite sequence.
7.12.2 To disassemble and assemble the gearbox
1. Remove the cutting unit. Refer to
install the cutting unit on page 30 .
2. Remove the clutch springs.
1369 - 001 - 13.02.2020
3. Remove the 6 screws and remove the gearbox
Servicing
To remove and
cover. Use a flat screwdriver if it is necessary.
Repair instructions - 31