ABB REF 54 Series Technical Reference Manual, General page 92

REF 54_
92
Feeder Terminal
Technical Reference Manual, General
Table 5.2.1-11 Data communication
Rear interface, connector X3.1
Rear interface, connector X3.2
Rear interface, connector X3.3
Rear interface, connector X3.4
Front panel
SPA protocol
LON protocol
IEC_103 protocol
DNP 3.0
Modbus
1) These functions are only supported in the feeder terminal revisions of Release 3.5 or later.
2) These functions are only supported in the feeder terminal revisions of Release 3.0 or later.
not used, reserved for future purposes
RS-232 connection
RER 123 fibre-optic Bus Connection Module
protocols
RER 133 RS-485 Bus Connection Module
protocols
data transfer rates
SPA-ZC 302 Profibus-DPV1/SPA Gateway
protocol
SPA-ZC 400 SPA/ Ethernet Adapter
protocol
RS-485 connection
protocol
the fibre-optic interface module RER 103 is needed for galvanic
isolation
data transfer rates
RJ45 connection
galvanically isolated RJ45 connection for an external display panel
protocol
communication cable
optical connection
protocol
communication cable
bit rates
start bits
data bits
parity
stop bits
bit rates
bit rates
data bits
parity
stop bits
bit rates
data bits
stop bits
parity
bit rates
data bits
stop bits
parity
1MRS750527-MUM
1)
SPA, IEC_103, DNP 3.0 ,
1)
Modbus
2) 2)
DNP 3.0 , Modbus
DNP 3.0 and Modbus:
300 bps...19.2 kbps, selectable
1)
Profibus-DPV1
1)
IEC 61850
SPA, LON
SPA: 4.8/9.6/19.2 kbps,
selectable
LON: 78.0 kbps/1.2 Mbps,
selectable
CAN
1MRS 120511.001 (1 m)
1MRS 120511.002 (2 m)
1MRS 120511.003 (3 m)
SPA
1MKC950001-2
4.8/9.6/19.2 kbps
1
7
even
1
78.0 kbps/1.2 Mbps
9.6/19.2 kbps
8
even
1
0.3/0.6/1.2/2.4/4.8/9.6/19.2 kbps
8
1, 2
none, odd, even
0.3/0.6/1.2/2.4/4.8/9.6/19.2 kbps
5, 6, 7, 8
1, 2
none, odd, even