Epson L565 Service Manual page 31

L565/L566 Series
Discharging procedure
1. Release the Ink Supply Tank Assy.(Refer to
2. Place the Ink Supply Tank Assy on a place where its bottom is higher than the top of the Printhead.
3. To minimize the ink leakage from the Ink Supply Tube / Ink Supply Tank Tube , pinch the Ink Supply
Tube / Ink Supply Tank Tube with clips (x 2) .
4. Prepare a container for ink to discharge, then disconnect the Ink Supply Tube from the joint and put its
tip into the container for the ink.
5. To discharge the ink in the Ink Supply Tank Assy to the container.
6. Move the clips (x2) so that only the ink to discharge can flow in the Ink Supply Tank Tube .
7. The ink in the Ink Supply Tank is discharged into the container through the Ink Supply Tank Tube.
8. Repeat step 4 to Step 7 for all ink tanks to discharge all ink in the Ink Supply Tank .
Disassembly/Reassembly
Joint
Ink Supply Tube
Container
Figure 2-13. Discharging Ink (1)
Ink Supply Tube
Container for discharged ink
Figure 2-14. Discharging Ink (2)
Clip
Tube
Figure 2-15. Discharging Ink (3)
Discharging preparation
Clip (x 2)
Joint
Ink Supply Tank Assy
Ink Supply Tank Tube
Joint
Injector
φ
(tip of 3.2 mm)
Overview
(p.30))
Revision A
31
Confidential